Skip to content Skip to navigation menu



We are proud to work in partnership with Draeger to offer you the best safety solutions for the job in hand. Rest assured that all products supplied are certified to the appropriate quality standards where necessary, meaning that we have your full compliance and safety in mind.

Draeger Personal Protective Equipment (PPE)

Respiratory Protective Equipment
Respiratory Protective Equipment

The correct selection and application of respiratory protective equipment (RPE) is vital for protecting employees and meeting international safety standards. There are many working environments in which effective RPE is necessary, including cutting wood or stone, using products containing volatile solvents or working in a dusty area.

There is a range of different types of respirators, from disposable respirators for single uses, welding respirators, and full respiratory helmets and hoods for maximum protection.

Draeger Respiratory Protective Equipment

Disposable FFP1 Respirators
Disposable FFP1 Respirators
FFP1 masks supplied by Protec Direct are suitable for low level dust/oil or water based mists (hand sanding, drilling and cutting). Our range of FFP1 respirators all conform to the EN 149 standard on respiratory protection and filter a minimum of 80% of airborne particles. We stock dust masks from 3M, Respair, Draeger and Moldex.
Disposable FFP2 Respirators
Disposable FFP2 Respirators

Disposable FFP2 Dust Masks

If you are looking for FFP2 disposable respirators then you have come to the right place, as here at Protec we stock of a great selection which includes top brands like 3M, Respair, Moldex and Draeger. These masks are vital in helping to keep workers safe when there are harmful particles in the air, and it is actually the law for employers to provide them in some instances. Browse the complete range of FFP2 masks below, or read on to learn more about our disposable respirator range which also includes FFP1and FFP3 masks.


What are FFP2 masks?

FFP2 masks are types of respiratory protective equipment (RPE) which provide protection from airborne particles in accordance with official FFP dust mask ratings set out in EN 149. This European Standard ensures that FFP2 graded dust masks can protect against a moderate level of dust as well as solid or liquid aerosols, and ensures that the masks can filter a minimum of 94% of airborne particles. This makes FFP2 dust masks suitable for tasks such as plastering, sanding and carpentry.

In terms of other dust mask ratings, the FFP2 rating is the equivalent to 10x OEL Protection and 10x APF Protection.


Standards and Regulations for FFP2 disposable respirators

All of our FFP2 dust masks adhere to the EN149 European Standard which governs the general requirements and proper markings for RPE. There are also regulations which cover employers’ responsibilities for FFP2 dust masks and other respiratory equipment. These include:

  • Personal Protection Equipment Regulations (2002) – Employers must provide and maintain PPE to a suitable level and ensure that employees are fully trained on how to use it in the correct manner.
  • Control of Substances Hazardous to Health Regulations (2002) – Employers are responsible for protecting employees when they are working in environments which expose them to substances which are hazardous to their health.

Browse the full range of FFP2 disposable dust masks below or use the filters on the left to find exactly what you need. There are many more specialist items in our RPE collection, including respiratory helmets and welding respirators.

Disposable FFP3 Respirators
Disposable FFP3 Respirators

Disposable FFP3 Respirators

At Protec, we stock a variety of FFP3 masks to help keep your workers safe.


When are FFP3 masks needed?

FFP3 respirator masks are required when workers are exposed to materials such as:

  • Higher level fine dust or oil
  • Water-based mists
  • Hazardous pharmaceutical powders
  • Asbestos

At Protec, we sell FFP3 compliant respirators from a range of top brands including Respair, Draeger, Uvex, Moldex and 3M. All of these FFP3 masks filter a minimum of 99% of airborne particles, and are suitable for use in asbestos removal.


Regulations and standards for respiratory protection

Employers have a responsibility to protect workers if they are exposed to materials which could be harmful. The legislation and standards you should be aware of are as follows:

  • Control of Substances Hazardous to Health Regulations (2002) - According to these regulations, employers are responsible for protecting workers from being exposed to substances which could be hazardous to their health.
  • Personal Protection Equipment Regulations (2002) - These regulations state that PPE equipment must be monitored to ensure it is fit for purpose, as well as being properly stored and maintained. Employees must also be trained on how to use it.
  • EN 149 - This European standard lays out the general requirements and markings required for respiratory protection equipment to be fit for purpose.


At Protec, you can rest assured that all our FFP3 respirators comply with relevant European and British legislation, including the EN 149 standard. Browse our range of disposable respirator masks below, and make sure you’re equipped to meet the safety standards required.

Half Masks & Full Face Masks
Half Masks & Full Face Masks

Full Face Respirators & Half Mask Respirators

At Protec Direct we stock an amazing selection of high-quality half mask and full face respirators as part of our full collection of respiratory protective equipment. All of the respirators below are crucial in helping to keep you safe when working in areas with contaminated air. If you are an employer, then by law you may have to provide half mask or full face respirators to employees as part of their PPE – read on below to learn more about these regulations.


What are half mask and full face respirators?

Both full face and half mask respirators offer the wearer exceptional levels of protection for workers against air that contains particles and can be used for purifying air which is contaminated. This includes particles such as wood or stone when the materials are being cut, dust, or hazards chemicals and solvents. Both of these types of respirators have their own uses:

  • Full face respirators help to provide complete respiratory protection from particles in the air, but also provide protection for the eyes against airborne particles.
  • Half mask respirators are less intrusive but still provide complete respiratory protection for the wearer. They can be paired with safety glasses or goggles to offer all the protection of a full face respirator.


Who uses half mask and full face respirator masks?

Half mask respirators and full face respirators are used in a wide range of occupations in which the wearer requires protection from the chemicals or particles in the air around them. These include, but are not limited to industries such as carpentry, metal work, masonry, painting and decorating, chemical and laboratories, janitorial, property renovations, and the arts and creative industries.


Regulations and Standards for half and full mask respirators

All of the respiratory PPE available online at Protec Direct conform to the relevant European Standards. These include:

  • EN136 – This European Standard defines a full face respiratory mask as one which covers the chin, eyes, nose and mouth.
  • EN140 – This European Standard covers the technical specifications for half and quarter face mask. It defines a half face respiratory mask as one which covers the mouth, nose and chin.
  • EN143 – This European Standard covers particle filters used in respiratory masks and ensures they are classified according to their filtering efficiency. It splits filters into three categories – P1, P2, and P3.

There are also a number of regulations which govern respirators and PPE at work and set out an employers’ responsibilities, such as:

  • Personal Protective Equipment at Work Regulations (1992) – It is essential for employers to ensure safe systems of work so the need for PPE is minimised, but where PPE is necessary it should be provided and always be fit for purpose. The PPE should be maintained and checked regularly and employees should be trained on how to correctly use it.

Browse the full collection of full and half face respirator mass below and find the suitable items for you and your employees. Or, browse many other specialist items such as FFP3 disposable respirators and welding respirators in our full RPE collection.