BK1 Adjustable Bath & Basin Wrench Kit

Bearhug Bath and Basin Wrench Kit, which allows the user to work on back nuts in restricted areas, with the versatile extension bars to fit most areas. Supplies in a strong and durable polypropylene c...

Code: SCOBK1

Bearhug Adjustable Tap Wrench Set 1/2 & 3/4in

Proven hugging priciple securely grips the majority of basin and bathtap backnuts & tail connector nuts.Suitable for use where access is especially difficult.Can be used with any standard 3/8in sq dri...

Code: SCOBATWSET

Bearhug Adjustable Tap Wrench 3/4in

Proven hugging priciple securely grips the majority of basin and bathtap backnuts & tail connector nuts.Suitable for use where access is especially difficult.Can be used with any standard 3/8in sq dri...

Code: SCOBATW22

Bearhug Adjustable Tap Wrench 1/2in

Proven hugging priciple securely grips the majority of basin and bathtap backnuts & tail connector nuts.Suitable for use where access is especially difficult.Can be used with any standard 3/8in sq dri...

Code: SCOBATW15

Bavk Brass Bleed Key - Carded

For bleeding the air from radiators especially after the summer period of non-use of the heating systems.Supplied in the natural brass condition.

Code: SCOBAVK

6552 Back Nut Wrench

Specially designed double ended wrenches to fit 1/2in (13mm) and 3/4 (19mm) lavatory basin and bath nuts.Designed for use in situations where access is restricted.Size 1/2in, 3/4in - 13 -19mm

Code: REC6552

361T Box Ring Immersion Heater Spanner

Made with octagon at the base of the cylindrical section to enable really tight immersion heaters to be loosened by striking the handle.The one piece casting enables full transmission of power to the ...

Code: MON361

345V Wrench & 2059m Key Twin Pack

Code: MON3452059

325L Pop Up Waste Installation Tool

Zinc plated pop up waste tool.For the difficult task of holding a pop up waste in position when installing into sinks, baths,basins or bidets.The two spring steel blades fit into the circumferential s...

Code: MON325

323F Box & 324h Mono Tap Spanners

Code: MON323F324H

Combi Stop Cock Key 3/8in 1/2in & 3/4in

Crutch head stop cock key for reaching and turning off/on mains stop cocks below ground level. The turning handle has one chisel end for lifting covers. Overall length 97cm / 38in Fits sizes 3/8in , 1...

Code: FAISCOCKKEY

Basin Wrench - Adjustable - Large 20 - 50mm

Basin wrench with adjustable spring action jaws that maintains automatic grip. Forged steel jaws turn 180-¦ for greater flexibility. To fit sizes 20-50mm pipe fittings.

Code: FAIBWADJL

Basin Wrench - Adjustable - Extending 10mm - 25mm

Adjustable basin wrench with telescopic handle, extends to 400mm. Spring action jaws maintain automatic grip and forged steel jaws that turn 180-¦ for greater flexibility. Fits sizes 10- 25mm pipe fi...

Code: FAIBWADJEXT

MLK20 Manhole Cover Lift Keys Pack of 2 - 20in

Designed to make the removal of manhole covers an eay operation.Closed handle rectangular shaped.Length. 20in.(pair)

Code: MONMLK20

MLK12 Manhole Cover Lift Keys Pack of 2 - 12in

heavy-duty manhole cover lifting keys with rectangular shaped ends and triangular handle.Zinc plated.Length: 12in (pair).

Code: MONMLK12

MLK06 Manhole Cover Lift Keys Pack of 2 - 6in

heavy-duty manhole cover lifting keys with rectangular shaped ends and triangular handle.Zinc plated.Length: 5in (pair).

Code: MONMLK06

360Q Flat Steel Immersion Spanner

The flat style immersion spanner is made from zinc plated, pressed steel. A one piece casting allows really tight immersion heater spanner to be loosened by striking the handle.

Code: MON360

358J Deep Box Immersion Spanner

Box ring immersion heater spanner made with octagon at base of steel cylinder and supplied with separate tommy bar.Size 3.3/8in AF - 86mm

Code: MON358

352R Spare Jaw - Large

Spare jaws to fit all monument adjustable wrenches.Large.Jaw capacity: 2in - 50mm Available in three sizes.

Code: MON352

3510 Spare Jaw - Medium

Spare jaws to fit all monument adjustable wrenches.Medium.Jaw capacity: 1 1/2in - 38mmAvailable in three sizes.

Code: MON351

350L Spare Jaw - Small

Spare jaws to fit all Monument adjustable basin wrenches. Small.Jaw capacity: 1 1/8in - 28.5mmAvailable in three sizes.

Code: MON350

349H Adjustable Fitted 3 Jaws Wrench

Adjustable basin wrench for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths.The teeth on the jaws will grip uneven shapes etc.The swivelling hea...

Code: MON349

345V Adjustable Fitted 2 Jaws Wrench

Adjustable basin wrench for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths.The teeth on the jaws will grip uneven shapes etc.The swivelling hea...

Code: MON345

341J Adjustable Fitted 2 Jaws Wrench (DIY)

D.I.Y. adjustable basin wrench for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths.The teeth on the jaws will grip uneven shapes as well as pipe...

Code: MON341

339C Stopcock Key 42in - Crutch Pattern

Crutch pattern stopcock keys for turning stopcocks on or off.Turning handle has one chisel end for lifting covers.Size.42in.

Code: MON339

335Q Stopcock Key 30in - 3/4in Square

Square pattern stopcock keys for turning stopcocks on and off.Turning handle has one chisel end for lifting covers.White Painted Finish.Size. 3/4in Square.Length. 30in.

Code: MON335

332H Stopcock Key 30in - 5/8in Square

Square pattern stopcock keys for turning stopcocks on and off.Turning handle has one chisel end for lifting covers.White Painted Finish.Size. 5/8in Square.Length. 30in.

Code: MON332

331E Stopcock Key Mini Crutch

Mini stopcock key designed for the difficult job of turning on and off hard to get at stopcocks of the crutch head type.For example mains cocks located in bathroom showers, cupboards under kitchen uni...

Code: MON331

330B Stopcock Key 42in - 1/2in Square

Square pattern stopcock keys for turning stopcocks on and off.Turning handle has one chisel end for lifting covers.White Painted Finish.Size. 1/2in Square.Length. 42in.

Code: MON330

327R Basin Wrench 15mm & 22mm

For fitting back nuts and union nuts of pillar and bath taps behind basins, sinks and baths.Strong Malleable material.Correctly machined jaws to fit standard nuts 15mm and 22mm.

Code: MON327

324H mono Bloc Back Nut Spanner

Box spanner set including tommy bar for the fitting and removal of mono taps.

Code: MON324

323F Tap Back Nut Box Spanner

Tap back nut box spanner which is double ended, for quick assembly of tap back nuts on basins.Size: 27 and 32mm.

Code: MON323

2067L Jonmac Boiler Pump Multitool

To facilitate the removal and replacement of boiler pump head retaining bolts and bleed screw cover plates.Includes 4mm flat bit to bleed the pump and 4.5mm and 6mm hexagon bits for the pump head bol...

Code: MON2067

2065F Radiator Valve Spanner

Spanner to facilitate fitting and removal of standard and thermostatic radiator valves.

Code: MON2065

2059M Multi Purpose Four Way Key

A multi purpose four way key for gas, water and electric meter cupboards, air conditioning units, stop valves, mains consoles etc, central heating pump cocks, some radiator valves and drain off valves...

Code: MON2059

2056D Three Legged Radiator Valve Key

Three legged radiator valve key for 1/2in, 3/4in & 1in Radiator Valves.

Code: MON2056

2054X Radiator Spanner Air Release Key

Steel, zinc plated valve spanner and Air release key.Slightly offset handle.Size Double Ended 12mm

Code: MON2054

2053U Radiator Spanner

Steel radiator spanner for 3/8in and 10mm square section radiator vent plugs and bleed screws.Zinc plated finish with slightly offset handle.

Code: MON2053

2052R Universal Radiator & Valve Key

Both ends are tapered and therefore self restricting.The three profiles make the tool universal,catering for 3/8in and 10mm square section radiator vent plugs and bleed screws.Bayonet or internal lug ...

Code: MON2052

2048E Radiator Stepped Wrench & Ratchet

Stepped radiator spanner and ratchet handle. For use on most radiator valves , nipples , plugs , tank connectors etc.

Code: MON2048

1010L Manhole Keys Pack 2

Manufactured from a single piece of malleable iron with a tee handle D shaped end.Designed to make the removal of Manhole covers an easier operation.Made with a 4in/100mm handle and a 5in/125mm shaft....

Code: MON1010