Model SD3 Arbor with 1/4in Pilot Drill.Also has two driving pins to spread the load.SDS Driving Shank.For use with Holesaw Sizes from 1.1/4in to 6in (32 to 152mm).
Code: ULTSD3
Model SD2 Arbor with 1/4in Pilot Drill.Has a SDS Driving Shank.For use with Holesaw Sizes from 9/16in to 1.3/16in (14-30mm).
Code: ULTSD2
Replacement HSS Pilot Drill for use with SC1 Arbor.1/4in Shank.Overall Length.117mm
Code: ULTSC6
The SC3B is a Blister Packed Mandrel and comes with a SC12 Pilot Drill.Drive is via a 7/16in (11.11mm) Hexagon Shank.The mandrel is for use with Holesaw Sizes from 1.1/4 to 6in. (32 to 152mm).
Code: ULTSC3B
Model SC3 Arbor with 1/4in Pilot Drill.Has a 7/16in Hexagon Chuck Drive.Also has two driving pins to spread the load.For use with Holesaws from 32 to 152mm diameter.(32-152mm).
Code: ULTSC3
The SC2RB is a Blister Packed Mandrel and comes with a SC12 Pilot Drill.Drive is via a 3/8in (9.5mm) Hexagon Shank.The Mandrel is for use with Holesaw Sizes from 9/16in to 1.3/16in (14 to 30mm).
Code: ULTSC2RB
Model SC2R Arbor with 1/4in Pilot Drill.Has a 3/8in Hexagon Chuck Drive.For use with Holesaws up to 30mm.(14-30mm)
Code: ULTSC2R
The SC1B is a Blister Packed Mandrel and comes with a SC6 Pilot Drill 1/4in (6.5mm).This Mandrel is for use with Holesaw Sizes from 9/16in to 1.3/16in (14 to 30mm).
Code: ULTSC1B
Replacement HSS Pilot Drill for use with SC2 and SC3 Arbors.1/4in Shank.Overall Length.81mm.
Code: ULTSC12
Model SC1 Arbor with 1/4in Pilot Drill.Has a 1/4in Diameter Chuck Drive.For use with holesaws up to 30mm.(Replacment Pilot Drill is ULTSC6).(14-30mm).
Code: ULTSC1
© Protect Direct Ltd (S4) A SIG Plc Group Company
