Torque Wrench 1/2sq Dr 20-100lb/ft Pro

Williams

Torque Wrench 1/2sq Dr 20-100lb/ft Pro

ProTorque torque wrenches for the professional, manufactured in Britain to a high specification and finish.

The Pro Torque has forged ratchet heads of 3/8in or 1/2in square drive incorporating a 30 point ratchet mechanism and a push through square drive for right or left hand threads.

Each Pro Torque is SERIAL NUMBERED and issued with a CERTIFICATE OF CALIBRATION.

Calibration test carried out on NAMAS approved equipment to BS.6703 and I.S.O.6789 torque wrench standards.


The Pro Torque has a fully adjustable scale in lbf.ft.,Nm. and Kgf.m.housed in a polished chromium plated tubular steel body which fully encloses the low friction ball bearing torque
mechanism.
A steel indicator rod with calibrations in lbf.ft.,Nm. and Kgf.M., adjusted by a hanger / key for easy torque setting. Supplied with a certificate of calibration and operating
instructions in a transparent blister pack (DC) or a plastic pack (PX).


Square Drive 1/2in
lbt ft 10 - 50
Nm 15 - 70
Overall Length 420mm / 16.1/2in
Weight 1020 Gramms

Code: WSS06415DC