Skip to content Skip to navigation menu

Mould Test Cube c/w Clamp Base 150mm x 150 mm

Mould Test Cube c/w Clamp Base 150mm x 150 mm

Exclusive Brand

Standards require that specimens are cast in accurately machined Moulds. The moulds should be capable of withstanding heavy usage without suffering distortion. It is important that these tolerances can be maintained to ensure consistent test results. A calibration service is available. Cast Iron construction. Four part design. Clamp type steel baseplate. Meets requirements of BS1881 part 108, EN12390-1 and ISO1920.

Code: 676857000

Exclusive Brand

£47.05 Each (ex. VAT)

£56.46 inc. VAT
Quantity discounts
£45.69 10+ (save £13.60+)
- +

Mould Test Cube c/w Clamp Base 150mm x 150 mm

Standards require that specimens are cast in accurately machined Moulds. The moulds should be capable of withstanding heavy usage without suffering distortion. It is important that these tolerances can be maintained to ensure consistent test results. A calibration service is available. Cast Iron construction. Four part design. Clamp type steel baseplate. Meets requirements of BS1881 part 108, EN12390-1 and ISO1920.

No videos available for this product

Reviews for this product

3 of 3 news itemsRelated news for this product

Posted on 29/11/2016Three metalworkers suffer lung conditions due to inhalation of fluid Read more

Three employees of an Uxbridge, Greater London company have developed lung diseases following excessive exposure to metal fluid. The CNC machine operators at Martin Baker Aircraft Company Ltd developed... Read more


Posted on 25/11/2016Breach of manual handling regulations leads to back injuries Read more

A manufacturer of engine components for Jaguar Land Rover and Audi cars has recently been fined following the injuries of six workers while lifting heavy parts manually. Birmingham Crown Court was... Read more


Posted on 24/11/2016Council workers affected by HAV Read more

A number of employees of Thanet District Council have been diagnosed as suffering from Hard Arm Vibration (HAV), following an investigation by the Health and Safety Executive (HSE). Canterbury Crown... Read more


Login to start product discussions Discussions for this product