PN3000X2 240 Volt 3kg SDS+ 3 Mode Hammer

A.E.G. Power Tools

PN3000X2 240 Volt 3kg SDS+ 3 Mode Hammer

FIXTEC - Keyless chuck changing - Fast and convenient use
AVS - Significantly reduces vibration - Comfortable, safer handling
VARIABLE SPEED - Drilling/chiselling speed increases or decreases with amount of pressure used - Optimum adjustment
SPEED PRESELECTION - Pre-adjustable maximum speed - Perfect setting
LOCK-ON MODE - Tool can run without the speed switch being continuously pressed - Comfortable, convenient handling
SAFETY CLUTCH - Automatically stops or reduces motor power in the case of a jammed drill bit - Safe operation
REVERSE MODE - Changes drilling direction - Enhanced versatility
ROTATION-STOP MODE - Turns off the rotation action - For operation in the chiselling mode
MULTI-POSITION LOCK - Chiselling angle can be locked at various positions - Full adjustment and versatility
PERCUSSION-STOP MODE - Turns off the hammering action - Enhanced versatility
DEPTH-GAUGE KNOB - Knob for releasing depth-gauge - Fast, easy operation
SOFTGRIP - Rubber-padded handle - Comfortable handling

Specification
Power input 800 Watt
Maximum Drilling Capacity:
Concrete 26mm
Wood 40mm
Steel 18 mm
Core drill 82 mm

No-load speed 1st / 2nd gear rpm 0 - 1.050 / 0 - 3.260
Hammer rate bpm 4000
Tool reception FIXTEC/SDS-plus
Weight kg 3,3
Blow energy J 3
Supplied with : Variobox I (blue), Front handle, depth gauge, Keyed chuck (1.5 - 13 mm), Fixtec adaptor