Power Tools > Power tool accessories > Router Bits & Accessories > Router Bits - Professional

Router Bits - Professional

Search within Router Bits - Professional:

Trend

S49/2 x 1/4 STC Burr & Rasp

Solid carbide burrs and rasps for removing welds and burrs in metal, also hand engraving and sculpting wood and metal.Ref S49/20 has no bottom cut.Recommended speed for mini burrs is 20,000 - 90,000 r...

Code: TRES49214TC

£16.98 Each ex VAT (£19.95 inc)

Trend

S49/1 x 1/4 STC Grp Metal & Wood

Ref S49/1 fine cut plunging cutter - end mill cut.Mainly for grinding, carving and shaping of glass, reinforced plastics and phenolics, but also suitable to carve wood.Recommended speed 10,000 - 30,00...

Code: TRES49114TC

£18.36 Each ex VAT (£21.57 inc)

Trend

S47/70 x 1/4 STC Solid Trimmer Cutter

Solid Tungsten Carbide economy trimmers.Ref. S47/70 is for short runs at 90 -¦ or 60 -¦ with an overall length of 32mm.Ref. S48/40 is self guiding for 90 degrees trimming only.Overall length is 52mm.T...

Code: TRES477014TC

£17.90 Each ex VAT (£21.03 inc)

Trend

S3/22 x 1/4 Tungsten Carbide Two Flute Cutter

Two flute straight cutters produce a cleaner finish than the single flute cutters.Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwood...

Code: TRES32214TC

£20.66 Each ex VAT (£24.28 inc)

Trend

S3/21 x 1/4 Tungsten Carbide Two Flute Cutter

Code: TRES32114TC

£24.33 Each ex VAT (£28.59 inc)

Trend

B19 Replacement Bearing

Replacement bearing to suit all Trend bearing guided router cutters.Outside Diameter:- 3/4inInside Diameter:- 1/4inThickness:- 9/32in

Code: TREB19

£2.75 Each ex VAT (£3.23 inc)

Trend

B18 Replacement Bearing

Replacement bearing to suit all Trend bearing guided router cutters.Outside Diameter:- 18mmInside Diameter:- 1/4inThickness:- 7/32in

Code: TREB18

£6.88 Each ex VAT (£8.08 inc)

Trend

B17 Bearing 17mm Dia x 1/4in Bore

Replacement bearing to suit all Trend bearing guided router cutters.Sleeved Bearings supplied with a spacing washer.Diameter. 17mm.Bore. 1/4in.

Code: TREB17

£7.34 Each ex VAT (£8.62 inc)

Trend

B16 Replacement Bearing

Replacement bearing to suit all Trend bearing guided router cutters.Outside Diameter:- 5/8inInside Diameter:- 1/4inThickness:- 11/64in

Code: TREB16

£2.75 Each ex VAT (£3.23 inc)

Trend

B15 Bearing

Replacement bearing to suit all Trend bearing guided router cutters.Sleeved Bearings supplied with a spacing washer.Diameter. 15mm.Bore. 1/4in.

Code: TREB15

£7.34 Each ex VAT (£8.62 inc)

Trend

B127A Replacement Bearing

Replacement bearing to suit all Trend bearing guided router cutters.Outside Diameter:- 1/2inInside Diameter:- 3/16inThickness:- 3/16in

Code: TREB127A

£2.75 Each ex VAT (£3.23 inc)

Trend

B127 Replacement Bearing

Replacement bearing to suit all Trend bearing guided router cutters.Outside Diameter:- 1/2inInside Diameter:- 1/4inThickness:- 3/16in

Code: TREB127

£4.13 Each ex VAT (£4.85 inc)

Trend

9/5 x 1/2 Tungsten Carbide Staff Bead/nosing 12.7mm

Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames.They can also be used to produce complete round over profiles for window board...

Code: TRE9512TC

£51.87 Each ex VAT (£60.95 inc)

Trend

8E/1 x 1/4 Tungsten Carbide Roman Ogee Cutter

These cutters are used extensively in the furniture and cabinet making trades to cut edge and face mouldings in natural timbers and man-made boards.Pin guided versions can be run along the work piece ...

Code: TRE8E114TC

£45.44 Each ex VAT (£53.39 inc)

Trend

7/01 x 1/4 Tungsten Carbide Ovolo Cutter

Ovolo and rounding over cutters are ideal for panel work and edge mounting, all can be used on natural timbers, man-made particles and fibre boards.Popular uses include edging window frames, glazing b...

Code: TRE70114TC

£16.98 Each ex VAT (£19.95 inc)

Trend

50/27 x 8mm HSSE Helical Plunge Bit 5 mm

Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensures a clean cut and resist the abrasive nature of...

Code: TRE50278HSE

£30.29 Each ex VAT (£35.59 inc)

Trend

50/06 x 8mm HSSE Helical Plunge Bit 6 mm

Code: TRE50068HSE

£13.31 Each ex VAT (£15.64 inc)

Trend

50/06 x 1/4 HSSE Helical Plunge Bit 6 mm

Code: TRE500614HSE

£16.06 Each ex VAT (£18.87 inc)

Trend

4/8 x 1/2 Tungsten Carbide Two Flute Cutter

Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, mortising and drilling.Use Tungsten Carbide tooling when working with abrasiv...

Code: TRE4812TC

£29.38 Each ex VAT (£34.52 inc)

Trend

4/80 x 1/2 Tungsten Carbide Two Flute Cutter

Code: TRE48012TC

£36.72 Each ex VAT (£43.15 inc)

Trend

47/4 x 1/4 Tungsten Carbide Pierce & Trim Cutter

Combination pierce and trim cutters, these cutters pierce and cut out aperture in laminate worktops. The base of the cutter acting as a guide follower.Single Flute cutters.Tooling TC1/4in Shank.C = 18...

Code: TRE47414TC

£14.69 Each ex VAT (£17.26 inc)

Trend

4/70 x 1/4 Tungsten Carbide Two Flute Cutter

Code: TRE47014TC

£28.46 Each ex VAT (£33.44 inc)

Trend

4/70 x 1/2 Tungsten Carbide Two Flute Cutter

Code: TRE47012TC

£28.46 Each ex VAT (£33.44 inc)

Trend

46/95 x 1/4 Tungsten Carbide Template Profiler

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template.Bearing guided cutters are suitable for both straight and curved work.F...

Code: TRE469514TC

£22.95 Each ex VAT (£26.97 inc)

Trend

46/90 x 1/4 Tungsten Carbide Template Profiler

Code: TRE469014TC

£30.75 Each ex VAT (£36.13 inc)

Trend

46/82 x 1/2 Tungsten Carbide 3 Flute Trimmer

Self guided Tungsten Carbide triple flute cutters for extra fine trimming and longer life. For trimming of laminate or plywood overlay.This trimmer has twin bearings for stability by increasing the be...

Code: TRE468212TC

£41.31 Each ex VAT (£48.54 inc)

Trend

46/7/50 x 1/4 Tungsten Carbide B/g Glazing Bar

Bearing guided glazing bar Ovolo jointing cutters. The glazing bar Ovolo cutter is bearing guided to speed setting up and to enable curved frames to be moulded.Shank 1/4 inTooling TCR = 10 mmD = 28 mm...

Code: TRE4675014TC

£46.36 Each ex VAT (£54.47 inc)

Trend

46/44 x 1/4 Tungsten Carbide Rebate Set

Popular rebate sets which include different size bearings for a choice of rebates, they provides easy setting up and accurate depth of cut.Ideal for rebating straight and shaped work pieces particular...

Code: TRE464414TC

£40.39 Each ex VAT (£47.46 inc)

Trend

46/390 x 1/2 Tungsten Carbide Guided Rebater

Bearing guided rebate set for straight of curved work, this set is ideal for either stationary or portable routers. The standard rebate depth is 19.1 mm (when using 12.7 mm bearing) Available as extra...

Code: TRE4639012TC

£55.08 Each ex VAT (£64.72 inc)

Trend

46/37 x 1/4 Tungsten Carbide Chamfer Cutter

These types of cutters are used for edging and chamfer cutting, on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering.Ball bearing guarded ...

Code: TRE463714TC

£39.02 Each ex VAT (£45.85 inc)

Trend

46/37 x 1/2 Tungsten Carbide Guided Chamfer

These types of cutters are used for edging, work and chamfer cutting, on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering.Ball bearing an...

Code: TRE463712TC

£39.02 Each ex VAT (£45.85 inc)

Trend

46/23 x 1/2 Tungsten Carbide Guided Trimmer

Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.Bearing guided c...

Code: TRE462312TC

£47.74 Each ex VAT (£56.09 inc)

Trend

46/22 x 1/2 Tungsten Carbide Trimmer

Code: TRE462212TC

£47.74 Each ex VAT (£56.09 inc)

Trend

46/2 x 1/4 Tungsten Carbide Edge Trim 90dg

Code: TRE46214TC

£24.33 Each ex VAT (£28.59 inc)

Trend

46/20 x 1/4 Tungsten Carbide Edge Trim 90dg

Code: TRE462014TC

£29.38 Each ex VAT (£34.52 inc)

Trend

46/20 x 1/2 Tungsten Carbide Guided Trimmer

Code: TRE462012TC

£30.29 Each ex VAT (£35.59 inc)

Trend

46/17 x 1/2 Tungsten Carbide Rounding Over Ovollo Cutter

Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards.Popular uses include edging window frames, glazing b...

Code: TRE461712TC

£46.36 Each ex VAT (£54.47 inc)