Power Tools > Power tool accessories > Router Bits & Accessories > Router Bits - Craft Range

Router Bits - Craft Range

Router Bits - Craft Range
C152 x 1/4 Tungsten Carbide Biscuit Jointer Set
Trend

C152 x 1/4 Tungsten Carbide Biscuit Jointer Set

This T.C.T two wing slotting cutter is ideal for biscuit jointing sizes No. 0 - 45mm x 15mm x 4mm Suitable for 8-12mm boards Use bearing B19A 9.05mm depthNo. 10 - 53mm x 1...

Code: TREC15214TC

£25.70 Each ex VAT (£30.20 inc)
more information
C152 x 1/2 Tungsten Carbide Biscuit Joiner Set
Trend

C152 x 1/2 Tungsten Carbide Biscuit Joiner Set

This T.C.T two wing slotting cutter is ideal for biscuit jointing sizes No. 0 - 45mm x 15mm x 4mm Suitable for 8-12mm boards Use bearing B19A 9.05mm depthNo. 10 - 53mm x 1...

Code: TREC15212TC

£25.70 Each ex VAT (£30.20 inc)
more information
C149 x 1/4 Tungsten Carbide Profile Scriber
Trend

C149 x 1/4 Tungsten Carbide Profile Scriber

Profile scribed doors in natural timber or medium density fibre board, are traditionally used in cupboards, kitchen doors, drawer fronts and wall panelling. With a relatively small outlay in cost of t...

Code: TREC14914TC

£36.72 Each ex VAT (£43.15 inc)
more information
C145 x 1/4 Tungsten Carbide Slotting Cutter 6.3mm
Trend

C145 x 1/4 Tungsten Carbide Slotting Cutter 6.3mm

This two wing slotting cutter is ideal for grooving and rebating operations.A 1/2in diameter, bearing is supplied with every cutter.Depth of cut can be changed by purchasing alternative bearing sizes....

Code: TREC14514TC

£16.06 Each ex VAT (£18.87 inc)
more information
C121 x 1/4 Tungsten Carbide Template Profile 1/4in
Trend

C121 x 1/4 Tungsten Carbide Template Profile 1/4in

These trimmers with shank mounted bearings are ideal for template guidance. Use for rebating and trimming edges.Extra care must be taken to avoide breakage of the cutterTCTD = 12.7 mmC = 25.4 mm

Code: TREC12114TC

£12.85 Each ex VAT (£15.10 inc)
more information
C116 x 1/4 Tungsten Carbide Self Guided Trim 1/2in
Trend

C116 x 1/4 Tungsten Carbide Self Guided Trim 1/2in

Self guided trimming bits. Used for trimming plastic or plywood overlays. Also for copy profiling with a template.Raise cutter in stages to spread wear of cutting edgesTCTShank 1/4inD = 12.7 mmC = 25....

Code: TREC11614TC

£11.93 Each ex VAT (£14.02 inc)
more information
C115 x 1/4 Tungsten Carbide Self Guided Trim
Trend

C115 x 1/4 Tungsten Carbide Self Guided Trim

Self guided trimming bits. Used for trimming plastic or plywood overlays. Also for copy profiling with a template.Raise cutter in stages to spread wear of cutting edgesD = 9.5 mmC = 12.7 mm

Code: TREC11514TC

£11.48 Each ex VAT (£13.49 inc)
more information
C049 x 1/4 Tungsten Carbide Self Guided Chamfer
Trend

C049 x 1/4 Tungsten Carbide Self Guided Chamfer

Chamfer & V Groove Cutters These types of cutters are used for edging, grooving, veining work and chamfer cutting, on man-made fibre boards, natural timbers and plastics. Tools are offered to produce ...

Code: TREC04914TC

£17.44 Each ex VAT (£20.49 inc)
more information
C044 x 1/4 Tungsten Carbide Chamfer V Groove
Trend

C044 x 1/4 Tungsten Carbide Chamfer V Groove

Chamfer & V Groove Cutters These types of cutters are used for edging, grooving, veining work and chamfer cutting, on man-made fibre boards, natural timbers and plastics. Tools are offered to produce ...

Code: TREC04414TC

£10.56 Each ex VAT (£12.41 inc)
more information
C040 x 1/4 Tungsten Carbide Self Guided Rebater
Trend

C040 x 1/4 Tungsten Carbide Self Guided Rebater

This cutter is self guiding and can be used to produce rebates, lapjoints, tongues and rebated corners.Alternative bearings can be purchased to vary the rebate.Diameter . 35.0mm.C = 12.7mm.E = 11.1mm....

Code: TREC04014TC

£18.82 Each ex VAT (£22.11 inc)
more information
C022 x 1/4 Tungsten Carbide Two Flute 12-7mm
Trend

C022 x 1/4 Tungsten Carbide Two Flute 12-7mm

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow mortising.They can be used on a wide range of ma...

Code: TREC02214TC

£11.02 Each ex VAT (£12.95 inc)
more information
C016 x 1/4 Tungsten Carbide Two Flute 10.0mm
Trend

C016 x 1/4 Tungsten Carbide Two Flute 10.0mm

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.They can be used on a wide range of ...

Code: TREC01614TC

£9.18 Each ex VAT (£10.79 inc)
more information
C015 x 1/4 Tungsten Carbide Two Flute 9.5mm
Trend

C015 x 1/4 Tungsten Carbide Two Flute 9.5mm

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow mortising.They can be used on a wide range of ma...

Code: TREC01514TC

£9.18 Each ex VAT (£10.79 inc)
more information
C013 x 1/4 Tungsten Carbide Two Flute 9.5mm
Trend

C013 x 1/4 Tungsten Carbide Two Flute 9.5mm

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such as engraving, grooving, rebating and shallow mortising.They can be used on a wide range of m...

Code: TREC01314TC

£8.26 Each ex VAT (£9.71 inc)
more information
C008 x 1/4 Tungsten Carbide Two Flute 6.3mm
Trend

C008 x 1/4 Tungsten Carbide Two Flute 6.3mm

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow mortising.They can be used on a wide range of ma...

Code: TREC00814TC

£8.26 Each ex VAT (£9.71 inc)
more information
C007 x 1/4 Tungsten Carbide Two Flute 6.3mm
Trend

C007 x 1/4 Tungsten Carbide Two Flute 6.3mm

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow mortising.They can be used on a wide range of ma...

Code: TREC00714TC

£6.43 Each ex VAT (£7.56 inc)
more information
C005 x 1/4 Tungsten Carbide Two Flute 6.0mm
Trend

C005 x 1/4 Tungsten Carbide Two Flute 6.0mm

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow mortising.They can be used on a wide range of ma...

Code: TREC00514TC

£6.88 Each ex VAT (£8.08 inc)
more information
C002 x 1/4 Tungsten Carbide Two Flute 4.0mm
Trend

C002 x 1/4 Tungsten Carbide Two Flute 4.0mm

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow mortising.They can be used on a wide range of ma...

Code: TREC00214TC

£9.18 Each ex VAT (£10.79 inc)
more information
C001 x 1/4 Tungsten Carbide Two Flute 3.2mm
Trend

C001 x 1/4 Tungsten Carbide Two Flute 3.2mm

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow mortising.They can be used on a wide range of ma...

Code: TREC00114TC

£9.64 Each ex VAT (£11.33 inc)
more information
C130 x 1/4 Tungsten Carbide Corner Bead
Trend

C130 x 1/4 Tungsten Carbide Corner Bead

Attractive edge moulds, a full corner bead can be produced by making a second pass at 90-¦.T.C.T.Shank = 1/4in.R = 4.8mmD = 26mmd = 22mmC = 16mmB = 15.9mm Craft ...

Code: TREC13014TC

£27.54 Each ex VAT (£32.36 inc)
more information