Sb-3734n-7-150 Par Pin Punch 7mm 9/32in

Code: BAHPPP932

Sb-3734n-2-150 Par Pin Punch 2mm 5/64in

Code: BAHPPP564

Sb-3734n-4-150 Par Pin Punch 4mm 5/32in

Code: BAHPPP532

Sb-3734n-8-150 Par Pin Punch 8mm 5/16in

Code: BAHPPP516

Sb-3734n-10-150 Par Pin Punch 10mm 3/8in

Code: BAHPPP38

Sb-3734n-5-150 Par Pin Punch 5mm 3/16in

Code: BAHPPP316

Sb-3734n-3-150 Par Pin Punch 3mm 1/8in

Code: BAHPPP18

Sb-3734n-6-150 Par Pin Punch 6mm 1/4in

Parallel pin punch made from vanadium extra with hexagonal shank. They have fully polished steel surfaces and a brilliant chrome finish.

Code: BAHPPP14

S565pc Pin Punch Set 8pc

Well proportioned, hardened and tempered with knurled finger grip.Set of all sizes: (1.5mm (1/16 Inch), 2.5mm (3/32 Inch), 3mm (1/8 Inch), 4mm (5/32 Inch), 5mm (3/16 Inch), 5.5mm (7/32 Inch), 6mm (1/4...

Code: STRS565PC

Pin Punch Set 8 Round Head

These punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes.The pins should first be started with a hand or taper punch to avoid damage to the end ...

Code: FAIPPSET8RH

Pin Punch Set 4 Round Head

These punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes.The pins should first be started with a hand or taper punch to avoid damage to the end ...

Code: FAIPPSET4RH

Round Head Pin Punch 5/32in

A range of hardened steel punches, and used for removing pins in parallel holes. The pins should first be started with a hard or taper punch to avoid damage to the end of the parallelpunch. Length: 4i...

Code: FAIPP532RH

Round Head Pin Punch 3/32in

A range of hardened steel punches, and used for removing pins in parallel holes. The pins should first be started with a hard or taper punch to avoid damage to the end of the parallelpunch. Length: 4i...

Code: FAIPP332RH

Round Head Pin Punch 3/16in

A range of hardened steel punches, and used for removing pins in parallel holes. The pins should first be started with a hard or taper punch to avoid damage to the end of the parallelpunch. Length: 4i...

Code: FAIPP316RH

Round Head Pin Punch 1/8in

A range of hardened steel punches, and used for removing pins in parallel holes. The pins should first be started with a hard or taper punch to avoid damage to the end of the parallelpunch. Length: 4i...

Code: FAIPP18RH

Round Head Pin Punch 1/4in

A range of knurled bodies punches with extra long pins, used for driving out long retaining pins. The pins should first be started with a hard or taper punch to avoid damage to the point of the pin pu...

Code: FAIPP14RH

Round Head Pin Punch 1/16in

A range of hardened steel punches, and used for removing pins in parallel holes. The pins should first be started with a hard or taper punch to avoid damage to the end of the parallelpunch.Length: 4in...

Code: FAIPP116RH