Durable nylon body.Tungsten carbide wheel - 10mmOutlasts normal steel wheel cutters by up to 10 times.Suitable for cutting ceramic tiles and glass.Integral notches for breaking outBall end for tapping...
Code: VIT702234
Durable nylon body.Six Tungsten steel wheels - 4mmIntegral notches for breaking outBall end for tapping glass.
Code: VIT701380
Machined brass body.Five tungsten steel wheels - 5mm.Integral notches for breaking out Cuts circles up to 250mmEasy head adjustment for straight cuts.Ideal for fitting window vents, extractor fans, et...
Code: VIT700918
The 3 - in - 1 glass cutter has been designed to provide safe, easy and accurate cutting of plain and patterned sheet glass up to 6mm thick.The tool serves a dual-purpose function, the glass is scored...
Code: PLAGC900
Over Centre Lever operating suction pad for firm location on glass, with clear dual inch metric scale reading diameter of circle.Easy thumb screw adjustment fitted with carbide replacement wheel for l...
Code: SHW956
Over Center Lever operating suction pad for firm location on glass, with clear dual inch metric scale reading diameter of circleEasy thumb screw adjustment fitted with carbide replacement wheel for lo...
Code: SHW9512
A tungsten carbide wheel cutter .The spring loaded block allows a small amount of lubricant onto the cutting line making for smooth, easy cutting.The oil is stored in the hollow plastic handle.A good ...
Code: SHW920
A tungsten carbide cutter with quick change wheel and carrier unit.Handle is made of cast iron for greater strength general purpose cutter but suitable for hand cutting use.Can be used on flat glass (...
Code: SHW706
Spare Block complete with wheel to suit the TW702 Maxicut Glasscutter.
Code: SHW703
A traditionally shaped professional glass cutter which has a wooden handle, swiveling block and tungsten carbide wheel.For use on flat glass 1.5-5mm, picture glass, hard glass (not toughened), cathedr...
Code: SHW702
A tungsten carbide wheel unit is fitted to a green enameled die-cast handle.The wheel and carrier are replaced as a unit.For flat glass 3-6mm.Higher quality wheel gives greater precision than model 70...
Code: SHW701
A single wheel glass cutter fitted to a metal die-cast handle.The wheel is of tungsten carbide.For flat glass 3-6mm, or makes a excellent tile cutter.
Code: SHW700
A tungsten carbide wheel glass cutter fitted to a hardened steel block for increased wear resistance.Wooden handle for comfort in use.Very high specification together with hand ground larger wheel mak...
Code: SHW600
Designed for all types of cutting, curves as well as straight lines.Special grade tungsten carbide wheel and axle.Block can swivel or be locked in one position.Carefully designed wooden handle.For fla...
Code: SHW2000
Blue nylon handle , single wheel glasscutter for DIY use for use on flat glass from 3mm to 6mm
Code: SHW106
This Super six-wheel cutter has tungsten alloy wheels for extra life, precision honed and tested, a six -pin turret in steel and is recommended for professional glaziers.Nickel plated head with high q...
Code: SHW105
Consisting of six high quality carbon steel wheels precision ground and inspected.Suitable for general purpose cutting.The body being moulded in nylon glassfibre loaded for high impact strength.For fl...
Code: SHW104
Hardened steel wheel in a replacement clip for easier changing of wheels.Fitted to a die-cast handle with yellow stove enamel finish.For flat glass 3-6mm.
Code: SHW102
Hardened steel wheel in metal die-cast holder with red stove enamel finish.For flat glass 3-6mm.For handyman use.
Code: SHW100
© Protect Direct Ltd (S4) A SIG Plc Group Company
